Fritzbox: configure la conexión remota USB (para impresora, disco duro y escáner)
Cada Fritzbox tiene al menos un puerto USB que se puede configurar como conexión remota. Esto le permite acceder a todos los dispositivos conectados, como impresoras, escáneres y discos duros a través de Internet, como si estuviera conectado a su PC. Con las amplias instalaciones, debe ser paciente.
Paso 1: prepare la PC para la conexión remota USB
La computadora que desea utilizar para acceder de forma remota a los dispositivos USB no admite automáticamente el hardware conectado. En cambio, se requieren los controladores correctos.
- Por lo tanto, conecte todos los dispositivos que luego le gustaría usar con su Fritzbox a su PC e instale los controladores necesarios.
- En Windows, la instalación del controlador generalmente funciona automáticamente. Si hay problemas, también puede comenzar la instalación manualmente
Paso 2: configura la conexión remota USB Fritzbox
Tan pronto como se instalen todos los controladores necesarios, puede activar la conexión remota de su Fritzbox.
- Para hacer esto, primero conecte el dispositivo USB deseado a su Fritzbox.
- Luego abra la interfaz de usuario de Fritzbox en su navegador e inicie sesión con la contraseña de su enrutador.
- Active la vista "Modo avanzado" en la parte inferior izquierda, si aún no lo ha hecho.
- Ahora haga clic en "Dispositivos USB" en "Red doméstica" a la izquierda y cambie a la pestaña "Conexión remota USB".
- Coloque una marca de verificación en el campo "Conexión remota USB activa" y seleccione si su dispositivo es una impresora, una memoria USB u otros dispositivos, como un escáner.
- Finalmente, haga clic en "Aplicar" para configurar la conexión remota USB. Esto lleva unos segundos. Ahora puede ver su hardware conectado en la pestaña "Descripción general del dispositivo".
Paso 3: instale el programa de conexión remota Fritzbox
A continuación, debe instalar el software adecuado para la conexión remota USB del Fritzbox en su computadora. Para esto necesita al menos Windows 7 o más reciente. Los usuarios de Mac deben desviarse un poco durante la instalación.
- Para hacer esto, haga clic en el enlace del programa apropiado en la pestaña "Conexión remota USB" (vea la captura de pantalla). Alternativamente, abra este sitio web en su navegador y descargue la herramienta usando el botón "Descargar".
- Luego seleccione "Instalar" y se descargará el programa llamado "fritzbox-usb-fernschluß.application". Después de descargar, instale la herramienta en su PC haciendo doble clic en ella.
- Repita estos pasos en cada dispositivo que desee usar para acceder a su impresora y compañía.
Paso 4: configure y use la conexión remota USB
Finalmente, configure el programa que acaba de instalar para usar la conexión remota de Fritzbox de forma permanente.
- Después de instalar la herramienta, aparece un icono con un cable de impresora USB en la esquina inferior derecha de la barra de tareas. Haga clic con el botón derecho del mouse y seleccione "Conectar impresora automáticamente" o "Conectar disco duro automáticamente".
- Luego haga doble clic en el icono para abrir la ventana del programa.
- Ingrese su contraseña en el medio con el que inicia sesión en Fritzbox. Deje en blanco el campo "Nombre de usuario" a menos que lo haya configurado en el enrutador.
- Si hace clic en "Actualizar" en la parte inferior derecha, su dispositivo conectado aparecerá en la mitad derecha de la ventana.
- Ahora siga las instrucciones en pantalla para seleccionar el controlador de dispositivo instalado previamente.
- Finalmente, haga clic derecho en su dispositivo para conectarse a él a través de una conexión remota USB. Si la conexión es exitosa, se muestra un marco verde.
- Nota: Si ha conectado el dispositivo a su PC a través de una conexión remota USB, otros usuarios no podrán conectarse a él al mismo tiempo. Antes de eso, debe desconectarse haciendo clic nuevamente en el dispositivo.
En otro artículo, le mostraremos cómo configurar DynDNS en el Fritzbox además de la conexión remota USB.